Test Latency Between Two Servers (Linux)

Today I was looking for a simple way to test the latency and bandwidth between two Linux servers.

The easiest way, of course, is to just use ping. The ping utility should be available on almost any Linux server and is extremely easy to use. Just login to one of your servers and then execute the following command using the IP address of your second server:

ping x.x.x.x

You can leave this running for a while and when you have seen enough data, just hit Ctrl + C to interrupt the program. This will result in an output such as the following:

PING ( 56(84) bytes of data.
64 bytes from icmp_seq=1 ttl=64 time=0.180 ms
64 bytes from icmp_seq=2 ttl=64 time=0.150 ms
64 bytes from icmp_seq=3 ttl=64 time=0.148 ms
64 bytes from icmp_seq=4 ttl=64 time=0.150 ms
--- ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3000ms
rtt min/avg/max/mdev = 0.148/0.157/0.180/0.013 ms

Important to note here are are the latencies for the individual tests as well as the overall average which are highlighted in bold in the above. This shows us that there is an average latency of 0.157 between the two servers tested.

In order to test the bandwidth and get some more information about latencies, you might also want to install the iperf tool.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s